草莓A字架_草莓立体种植槽_PVC草莓槽_华耀农业

使用微信扫描二维码分享朋友圈，成交更快更简单！

草莓A字架_草莓立体种植槽_PVC草莓槽_华耀农业

草莓A字架_草莓立体种植槽_PVC草莓槽该技术是利用3-4层分层式框架，在框架上放置栽培容器，在容器内种植草莓的1种栽培技术。这个分层式框架主要分为A字型和阶梯形2种。栽培架要按照南北向排放，为光照条件和减少遮光，排放时应选取适当的栽培架间距。架式栽培包括基质栽培和水培2种形式。以A字型栽培架栽培为例。A型栽培架主体框架为钢结构，左右两侧栽培架各安装3-4排栽培槽，层间距40cm，距地面5m，高处2m，栽培架宽1.3m左右；栽培槽一般用PVC材料制作，直径为20cm；立架南北向放置，各排栽培架间距为70cm。该形式操作方便，大大减轻了劳动强度。单位面积栽培架上栽培的草莓数量是平地栽培的2倍，产量比原来提高倍。
Strawberry A-frame_ Three dimensional strawberry planting trough_ PVC strawberry trough this technology is a kind of cultivation technology which uses 3-4 layer layered frame, places the cultivation container on the frame, and plants strawberry in the container. This layered frame is mainly divided into A-shape and ladder shape. In order to ensure the light conditions and reduce the shading, the proper spacing of the planting racks should be selected. Trellis culture includes substrate culture and hydroponics. Take A-shaped cultivation as an example. The main frame of A-type cultivation frame is steel structure, 3-4 rows of cultivation grooves are installed on the left and right sides of the cultivation frame, the layer spacing is 40cm, 5m from the ground, 2m from the highest position, and the width of the cultivation frame is about 1.3m; the cultivation groove is generally made of PVC material, with a diameter of 20cm; the vertical frame is placed in the north-south direction, and the spacing of each row of cultivation frames is 70cm. The form is easy to operate and greatly reduces the labor intensity. The number of strawberries cultivated on the shelf per unit area is twice that of flat cultivation, and the yield is twice as high as the original.

草莓立体栽培优点:
一：方便操作
立体式栽培的草莓，便于采摘果实，降低了劳动强度。
二：节约土地
传统模式的草莓栽植密度为12～15万株/hm2，改用立体栽培模式后，栽培总量可达40. 5万～45. 0万株/hm2，相当于传统平地栽培的3 倍，节约土地2/3 以上，产品产量是原来的3 倍。
三：改善植株发育
草莓生长对水肥条件要求较高，常发生连作障碍。而采用立体无土栽培，可按要求任意选配基质和营养液，不受土壤条件的限制，同时可根据草莓的生理特点和各阶段生长对水肥的需求，调节营养液浓度，使草莓生长发育始终处于佳状态。
Advantages of three-dimensional Strawberry Cultivation:
1： Easy to operate
Strawberries planted in three-dimensional way are easy to pick fruits and reduce labor intensity.
2： Saving land
The planting density of strawberries in the traditional mode is 12~15 × 10 000 plants /hm2. After the three-dimensional cultivation mode is used, the total cultivation amount can reach 405 thousand ～ 450 thousand plants /hm2, equivalent to 3 times of the traditional flat cultivation, saving more than 2/3 of the land, and the product yield is 3 times of the original.
3： Improve plant development
Strawberry growth requires high water and fertilizer conditions, and continuous cropping obstacles often occur. However, with the three-dimensional soilless cultivation, the substrate and nutrient solution can be selected at will according to the requirements, not limited by the soil conditions. At the same time, the nutrient solution concentration can be adjusted according to the physiological characteristics of strawberries and the demand of water and fertilizer for each stage of growth, so that the growth and development of strawberries will always be in the best state.

安平县华耀育苗设备厂生产白色pvc立体种植槽，此款产品主要根据草莓种植的要求,特点精心设计出来的种植槽.此产品非常适合草莓的种植,是目前市场上的产品.草莓立体种植槽尺寸为上口宽30cm,底宽20cm,高为25cm.我厂一直本着信誉,质量,服务的生产理念将我产品全国各个城市以及出口到其他国家
Anping Huayao seedling equipment factory specializes in the production of white PVC three-dimensional planter, which is specially designed according to the requirements and characteristics of strawberry planting. This product is very suitable for strawberry planting, and is a high-quality product on the market at present. The size of strawberry three-dimensional planter is 30cm wide at the top, 20cm wide at the bottom and 25cm high. Our factory has always been based on reputation and quality, The production concept of \"service first\" sells my products to all cities in China and to other countries