LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1º @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350ºC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300ºC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370ºC.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300ºC N/mm² 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10ºC/ minute ramp from 25 to 400
ºC
@ 340ºC, % 0.2
@ 400ºC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300ºC
Volume Resistivity, ohm-cm ≤0.01
汉高乐泰导电胶,杨浦厚膜汉高ABLESTIKJM7000导电胶
面议
产品名：汉高ABLESTIKJM7000导电胶,JM7000导电胶,汉高导电胶,乐泰导电胶
ablestik84-1A导电胶
面议
产品名：导电胶,耐高温导电胶,84-1A导电胶,84-1LMI导电胶
ablestik104AB耐高温环氧灌封胶
面议
产品名：乐泰104AB,ablestik 104A/B,耐高温灌封胶
电源灌封胶高导热灌封胶LORDSC-320
面议
产品名：lord灌封胶,lordsc-320LVH,高导热灌封胶,灌封胶
Au80sn20金锡焊片
面议
产品名：耐高温灌封胶,金锡焊片,导电胶,ablestik 104
高导热导电胶军工导电胶导电胶双85导电胶耐高温导电胶
面议
产品名：高导热导电胶,导热导电胶,导电胶,纳米银胶
单组份常温贮存导电胶军工导电胶双85导电胶可代替H20E
面议
产品名：导电胶,烧结银,导电银浆,导电银胶
厚膜浆料杜邦浆料代替品军工浆料钯银浆料玻璃浆料
面议
产品名：厚膜浆料,钯银浆料,玻璃浆料,钯金浆料