LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1º @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350ºC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300ºC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370ºC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150ºC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300ºC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300ºC
Chip Size: ROC
15 x 15 mm > 5
汉高乐泰导电胶,杨浦厚膜汉高ABLESTIKJM7000导电胶
面议
产品名：汉高ABLESTIKJM7000导电胶,JM7000导电胶,汉高导电胶,乐泰导电胶
ablestik84-1A导电胶
面议
产品名：导电胶,耐高温导电胶,84-1A导电胶,84-1LMI导电胶
浙江汉高乐泰2850FT环氧灌封胶颜色
面议
产品名：乐泰2850FT环氧灌封胶,2850ft灌封胶,2850灌封胶,环氧灌封胶2850FT
香港进口汉高乐泰144A耐高温环氧胶传感器,乐泰144A
面议
产品名：乐泰144A耐高温环氧胶,乐泰144A单组份环氧胶,乐泰144A,耐高温环氧胶
澳门TSV小型晶圆喷镀台MEMS
面议
产品名：TSV小型晶圆喷镀台,晶圆电镀机,晶圆喷镀机,晶圆电镀台
陕西汉高乐泰2850FT环氧灌封胶代理
面议
产品名：乐泰2850FT环氧灌封胶,2850ft灌封胶,2850灌封胶,环氧灌封胶2850FT
汉高乐泰ablestik3145晶体管胶,甘肃汉高乐泰ablestik3145绝缘导热胶标准
面议
产品名：ablestik3145绝缘导热胶,ablestik 3145二极管胶,ablestik 3145晶体管胶
乐泰2025D绝缘胶,湖南厚膜电路ablestik2025D芯片
面议
产品名：ablestik2025D绝缘胶,2025D绝缘胶,芯片绝缘胶,ablestik 2025D封装胶