LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1º @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350ºC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300ºC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370ºC.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300ºC N/mm² 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10ºC/ minute ramp from 25 to 400
ºC
@ 340ºC, % 0.2
@ 400ºC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300ºC
Volume Resistivity, ohm-cm ≤0.01
汉高乐泰导电胶,杨浦厚膜汉高ABLESTIKJM7000导电胶
面议
产品名：汉高ABLESTIKJM7000导电胶,JM7000导电胶,汉高导电胶,乐泰导电胶
ablestik84-1A导电胶
面议
产品名：导电胶,耐高温导电胶,84-1A导电胶,84-1LMI导电胶
江津乐泰SF7365清洗剂
面议
产品名：乐泰SF 7365清洗剂,清洁剂
本溪乐泰518密封胶
面议
产品名：乐泰 518 密封胶,乐泰 FP4531,乐泰 FP4531底部填充剂
广西乐泰LB8008润滑剂
面议
产品名：乐泰 LB 8008 润滑剂,润滑剂
亳州厚膜汉高ABLESTIKJM7000导电胶
面议
产品名：汉高ABLESTIKJM7000导电胶,JM7000导电胶,汉高导电胶,乐泰导电胶
郑州乐泰2762FT环氧导热灌封胶定子灌封胶
面议
产品名：2762FT环氧导热灌封胶,MEMS键合金线,键合金线,键合金丝
长春乐泰2762FT环氧导热灌封胶定子灌封胶
面议
产品名：2762FT环氧导热灌封胶,MEMS键合金线,键合金线,键合金丝