TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1º @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350ºC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300ºC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370ºC.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300ºC N/mm² 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10ºC/ minute ramp from 25 to 400
ºC
@ 340ºC, % 0.2
@ 400ºC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300ºC
Volume Resistivity, ohm-cm ≤0.01
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150ºC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300ºC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300ºC
Chip Size: ROC
15 x 15 mm > 5
哪里有卖JM7000导电胶的？
北京汉高代理
汉高代理导电胶
乐泰导电胶
国产化导电胶
代替H20E导电胶
汉高乐泰导电胶,杨浦厚膜汉高ABLESTIKJM7000导电胶
面议
产品名：汉高ABLESTIKJM7000导电胶,JM7000导电胶,汉高导电胶,乐泰导电胶
ablestik84-1A导电胶
面议
产品名：导电胶,耐高温导电胶,84-1A导电胶,84-1LMI导电胶
邵阳乐泰EA-E20HP树脂胶乐泰EA-E20HP树脂胶
面议
产品名：乐泰EA-E20HP 树脂胶,乐泰EA-E20HP树脂胶
黄冈乐泰4070粘合剂乐泰4070粘合剂
面议
产品名：乐泰 4070 粘合剂,乐泰4070粘合剂
烟台乐泰518密封胶
面议
产品名：乐泰 518 密封胶,乐泰 FP4531,乐泰 FP4531底部填充剂
张家口乐泰567螺纹胶
面议
产品名：乐泰567螺纹胶,乐泰螺纹胶
湛江乐泰401快干胶快干胶
面议
产品名：乐泰401快干胶,快干胶
宝坻高导热汉高ABLESTIKJM7000导电胶,汉高导电胶
面议
产品名：汉高ABLESTIKJM7000导电胶,JM7000导电胶,汉高导电胶,乐泰导电胶