自动打孔机粉尘吸尘集尘器 特性：
1 、型滤材，亚微米级过滤效率 99% 以上，达标排放
2 、除尘风机，吸力强、风量大、噪音低、、运转平稳
3 、滤袋直立安装，过滤面均匀，停机振打清灰，避免粉尘二次吸附
4 、立柜式机体占地面积小，可加装万向脚轮，增加设备适用性
5 、设备具有过热、短路保护功能，设备运行稳定安全
6 、滤袋组合方便使用成本省，多用于干性大浓度粉尘的收集
7 、适合无压缩气源场合使用，大大增加除尘器适用范围
Accessories are designed to be strong and durable. Most parts are made of steel structure, very strong and not easy to damage. At the same time according to the actual situation, specific different specifications of non-standard accessories.
集尘器 特性：
1 、型滤材，亚微米级过滤效率 99% 以上，达标排放
2 、除尘风机，吸力强、风量大、噪音低、、运转平稳
3 、滤袋直立安装，过滤面均匀，停机振打清灰，避免粉尘二次吸附
4 、立柜式机体占地面积小，可加装万向脚轮，增加设备适用性
5 、设备具有过热、短路保护功能，设备运行稳定安全
6 、滤袋组合方便使用成本省，多用于干性大浓度粉尘的收集
7 、适合无压缩气源场合使用，大大增加尘铝屑收集环保吸尘器适用范围。
Is the development of the Chinese industry trusted industrial vacuum equipment supplier. Suitable for collecting metal iron dust, gypsum dust, cement dust, rubber powder and other similar dust and wet dust.
PTFE coated filter material is suitable for wet dust gas, because the contact Angle between filter material and water is greater than 108 degrees, so that the wet dust attached to the surface of the filter material is not sticky filter material, easy to blow off, thus, completely solve the problem of wet dust condensation sticky material.
自动打孔机粉尘吸尘集尘器 现有技术中，吸尘器包括本体、设置于本体上的尘筒，尘筒包括多个旋风筒，每个旋风筒均具有气流入口，在旋风筒的下侧设有通道，通道内设置有气流分配装置，该气流分配装置将通道内的气流分为与旋风筒数量相等的多股，该多股气流再分别进入各旋风筒内。但现有尘筒的构成部件较多，特别是气流分配装置的结构复杂，难以生产装配，造成整个吸尘器的生产成本较高。
The double side suction nozzle of powder industrial dust collector can be configured freely. According to the characteristics of dust, filter cylinders with different high efficiency filter materials can be selected. Free movable arm can be installed to extend the working face according to the demand, and explosion relief valve can be installed on the idle side to ensure the safety of JC series grinder dust collector.
